High temperature cycle programmer with support, 2 relays of 12A, real time clock
Performs automatic periodic cleaning by increasing the temperature of the installation for an adjustable time. This achieves a good cleaning of the ducts through which the DHW circulates and accumulates, only in installations with recirculation
For example, every 7 days your installation goes from a temperature of 60ºC to a temperature of 70ºC for 2 hours. If you do not achieve your objective, it is indicated on the screen with ELG
High temperature cycles in manual or automatic mode
Technical Characteristics
- Measures: RAIL 70 x 90 x 58 mm / BOX 105 x 170 x 98 mm
- Power supply: 230V~ +10%-15% 50/60Hz
- First relay 12(5)A 250V~
- Second relay for high temperature cycle support: 12(5)A 250V~
- It has a 300h reserve if the power supply fails in order to keep the clock on time
- Real-time internal clock and 300-hour autonomy
- 1.5m PTC probe. Range -40°C to +140°C, supports 200°C, included
- Also works as a thermostat with a set point between 10°C and 95°C
- It has a PIN function for protection and blocking of the keyboard.
Reviews
There are no reviews yet.