Siesta 105 WiFi RF Modulante

Digital programmable thermostat for heating with modulating boilers and wall mounting. Radio communication without wiring, modulating action. Large ultra-low consumption electronic ink display, WiFi programming through the App. Keyboard lock from the app, ideal for tourist apartments.

Technical Characteristics

• Measures Transmitter – Receiver: 105 x 105 x 40 mm
• Power supply: Receiver to 230Vac / Transmitter 2 batteries AA-LR6.
• Internal temperature and humidity sensor (it only indicates, it does not manage the relative humidity in the environment).
• Regulation range 5°C to 35°C, reading range 0°C to 50°C.
• Radio transmission frequency: 868.3 MHz.
• Operating distance between thermostat and receiver: 100 metres in an unobstructed field.
• Compatible with: WiFi 802.11 b/g/r (2.4GHz).
• WiFi security support: Open/WEP/WFA/WPA2-personal (TKIP and AES).
• From the thermostat itself you can select room temperature, stop or go.
• 3 touch buttons.
• In stop mode, it changes to anti-freeze set point, which is a configurable value.
• Using the free App, compatible with iOS and Android, installed on your smartphone you can configure:
  • Comfort schedules, economy, unemployment, anti-icing.
  • Regulation mode in heating or cooling.
  • Calibration between displayed and sensed temperature.
  • Maximum temperature and minimum temperature set point range.
  • Keyboard lock for improper manipulation, ideal for tourist apartments.
  • Adjustable differential action (0,1 to 3°K).
  • Temperature and relative humidity statistics.
  • Stop (switch to anti-freeze) / start.
  • Change in domestic hot water temperature (DHW)
  • Indicates the boiler’s error messages to help the technical service
• Outputs: 1 modulating
• Communication protocol compatible with modulating boilers
• Local communication via WiFi for programming or consultation from a smartphone.
• For new homes, without occupancy and without WiFi, it works in manual mode with radio communication (test for the installer)
• Electronic ink display:
  • Boiler status display (on/off).
  • Room temperature in °C (Celsius).
  • Ambient relative humidity.
  • Heating set point temperature
  • Setpoint temperature for DHW
• It keeps the programming in memory even if the batteries run out, since the information is in the App.
• The thermostat can be wall- or table-mounted with the optional accessory code 8.024 (Black Stand).
• Equipped with a reset button.