Digital programmable thermostat for heating and cooling with wall mounting, radio communication without wiring, output by changeover relay (3 contacts). Large ultra-low consumption electronic ink display, WiFi programming through the App. Keyboard lock, ideal for tourist apartments.
Technical Characteristics
- Measures Emitter – Receiver: 105 x 105 x 40 mm
- 230Vac power
- Internal temperature and humidity sensor (indicates, does not feel according to humidity)
- Regulation range 5° to 35°C, reading range from 0° to 50°C
- Radio transmission frequency: 868,3 MHz
- Distance between thermostat and receiver: 100 m
- Compatible with: Wi-Fi 802.11 b/g/r (2,4GHz)
- Wi-Fi security support: Open/WEP/WFA/WPA2-personal (TKIP y AES)
- From the thermostat itself you can select room temperature, stop or start
- At stop switch to antifreeze setpoint, it is selectable
- Through free app, compatible iOS and Android, installed on smartphone, it is possible to configure:
- schedules comfort setpoint, economy setpoint, off, frost protection
- calibration between displayed and sensed temperature
- maximum temperature setpoint and minimum temperature setpoint
- keyboard lock for undetected manipulations
- Adjustable differential (0.1 to 3°K)
- Statistics
- Stop (goes to defrost protection) / on
- geolocation, you can choose another set point or off
- Outputs: 1 switch relay (SPDT, 5Amp resistive, potential free contacts)
- Local communication via wifi for programming or consultation from smartphone
- Electronic ink display:
- Indication boiler status (on / off)
- Temperature in °C (Celsius)
- Error messages and failures, to help Technical Assistance Services
- It keeps the programming in memory, because it is in the app.
- Fixing plate receiver on the wall over box diameter 60mm, it is optional code 3.970 (Placa TA)
- Equipped with a reset button
Reviews
There are no reviews yet.