Water or water-based liquid leakage sensor, designed to monitor a perimeter area for leaks along water pipes or unwanted water ingress into rooms. Length 3 metres, one drop is sufficient.
It alerts locally, for remote communication it must be completed with a Telkan family communicator. Ideal for use in ICT rooms. It is very convenient to use to ensure control and show the proper functioning of the system.
It protects buildings, installations and equipment. The device includes the following electronic components: green power led, red alarm led, relay contacts to trigger the alarm and to actuate the sensor itself.
Technical Characteristics
- CE compliant.
- Power supply 3Vdc (2 Batteries 1,5v LR06 AA)
- Battery life approx. 1 year
- Power consumption 0,6W
- Conductivity switching threshold: <1 sec.
- Cable entry via PG7, max. diameter 6mm
- Terminal block max. 1.5mm2
- Ambient temperature 0 to 60°C
- Transport and storage temperature -20 to 60°C, with a maximum humidity of 85% RH non-condensing
- Relay output: switched load max. 8A 250Vac/ 30Vdc
- 3m sensor cable with double pass to isolate from false positives or to facilitate installation on metallic surfaces such as pipes.
- For other lengths please ask factory.
- Enclosure: Polyamide, grey
- Protection: IP65 according to EN60529
- Measuring principle conductivity at any point on the cable
Aplications
Water leak detection with alarm
Water leak detection with SMS notification and water shut-off
Water leak detection with water supply cut-off
Reviews
There are no reviews yet.