High temperature cycle programmer with 10A relay and real time clock
Technical Characteristics
- Measures: 65 x 90 x 40 mm
- Power supply: 230V~ +10%-15% 50/60Hz
- 1 relay 12(5)A 250V~
- 1.5m PTC probe. Range -40°C to +140°C
- It performs automatic periodic cleaning by increasing the temperature of the system for an adjustable time. This achieves a good cleaning of the ducts through which the DHW circulates and accumulates, only in installations with recirculation
- For example, every 7 days your installation goes from a temperature of 60°C to 70°C for 2 hours. In case you do not achieve your goal, it is indicated on the screen with ELG
- High temperature cycles in manual or automatic mode
- Also works as a thermostat with a set point between 10°C and 95°C
- It has a PIN function for protection and blocking of the keyboard.
- It has a 300-hour reserve if the power supply fails in order to keep the clock on time
Reviews
There are no reviews yet.